AI Summary: Checking a worn cutting tool against a CNC tool grinder’s documented specifications is a useful first step toward understanding equipment compatibility. This overview covers the AE30 from Bhavya Machine Tools, including its supported tool types, grinding range and key operating features, as confirmed on the company’s website.
CNC Tool Grinder Compatibility: What the AE30 Covers
Before any worn tool goes near a CNC tool grinder, it helps to know what the equipment itself is built to handle. Bhavya Machine Tools’ AE30 is a CNC Tool Resharpener Machine with a documented grinding range, tool compatibility list and set of operating features.
CNC Tool Grinding Machine Specifications: AE30 Grinding Range
The AE30 runs on a 4 axis control system with a documented grinding range of 4 to 20 mm. Bhavya Machine Tools lists a maximum standard cutting tool length of 150 mm, with an extended blade length range of 35 to 105 mm.
Clamping on the AE30 is manual, using ER32 collets. Standard collet sizes cover 4, 6, 8, 10, 12, 14, 16, 18 and 20 mm, with additional sizes available as an option.
AE30 Power and Drive Specifications
Bhavya Machine Tools lists the AE30 as running on a 220V, 50Hz power supply, with a total power rating of 1.75kW. Spindle power is listed at 0.75kW, with a spindle speed of 3300 RPM.
The cooling pump carries a rated power of 150W. The specification table lists X, Y and Z axis travel as 85mm. Confirm the travel specification for each axis with Bhavya Machine Tools.
CNC End Mill Grinding Machine and CNC Drill Bit Grinder: Supported Tool Types
Bhavya Machine Tools lists end mills, corner radius end mills, drill bits, ball nose mills and chamfer cutters under the AE30’s standard tool types. Confirm the required configuration when enquiring.
The AE30 is described as capable of grinding 2, 3 and 4 flute end mills. Standard grinding systems listed on the website cover corner radius end mills, ball nose profiles, DG drills and unequal end mills.
Tool Grinder Machine Features: What the AE30 Includes
Bhavya Machine Tools lists a set of diamond grinding wheels as standard on the AE30, made up of one cylindrical wheel and one pointed wheel. The machine includes a protective cover intended to contain dust during operation.
Documented operating features include automatic length and angle recognition, along with automatic grooving and edge refinement. Oil grinding with coolant is listed as a way to support grinding efficiency.
Bhavya Machine Tools displays “1 to 3 minutes to restore sharpness” in the AE30’s operating steps. The tool types or conditions associated with that figure are not specified in the listing.
AE30 Dimensions
The AE30’s listed dimensions are 1220 by 1020 by 1700mm, with a weight of 220kg. These figures are useful for planning floor space and placement within a workshop.
Our Other Product
Plate Rolling MachinesAE30 Maintenance Guidance from Bhavya Machine Tools
For water cooled models, Bhavya Machine Tools recommends cleaning the worktable surface daily. Regular cleaning of the water tank is also listed as part of routine upkeep.
Bhavya Machine Tools states that this practice helps prolong the service life of the equipment. This guidance applies to maintaining the machine itself and is separate from decisions about whether a specific worn tool should be reground or replaced.
What AE30 Specifications Do and Do Not Confirm
The specifications above describe what the AE30 is built to grind, covering tool type, size range and available features. This is useful for a first pass check on whether a worn tool’s type and size fall within the machine’s documented capability.
A match on paper does not confirm that a specific worn tool is a good candidate for tool resharpening. That judgment depends on the tool’s own condition, which falls outside what these specifications establish.
Email!
CNC Tool Resharpener Machine from Bhavya Machine Tools
Bhavya Machine Tools lists the AE30 CNC Tool Resharpener Machine on its website. The company is headquartered in Ahmedabad, India, with branches supporting customers in the UAE and USA.
Choose the Right CNC Tool Grinder for Your Workshop
The AE30’s grinding range, tool compatibility, power ratings and maintenance guidance are all listed directly on Bhavya Machine Tools’ website. For specific tool or configuration questions, it is worth discussing your requirements directly with Bhavya Machine Tools.
Frequently Asked Questions on CNC Tool Grinder
What tool types does the AE30 from Bhavya Machine Tools support?
End mills, corner radius end mills, ball nose mills, drill bits and chamfer cutters are listed as the AE30's standard tool types, with configuration to confirm at enquiry.
What is the AE30's documented grinding range?
The documented grinding range is 4 to 20 mm, with a maximum standard cutting tool length of 150 mm.
Does meeting the AE30's specifications mean a worn tool should be reground?
No. The published specifications provide an initial basis for checking equipment compatibility. They do not establish whether an individual worn tool should be reground or replaced.
What are the AE30's power and drive specifications?
The AE30 runs on a 220V, 50Hz supply with a total power rating of 1.75kW. Spindle power is listed at 0.75kW with a spindle speed of 3300 RPM.
Does Bhavya Machine Tools provide maintenance guidance for the AE30?
Yes, for water cooled models. Bhavya Machine Tools recommends daily cleaning of the worktable surface and regular cleaning of the water tank to help prolong the equipment's service life.
How quickly does the AE30 restore tool sharpness?
Bhavya Machine Tools displays "1 to 3 minutes to restore sharpness" in the AE30's operating steps. The tool types or conditions behind that figure are not specified in the listing.
